Laurel-electronics LAUREATE SERIES 2 COUNTER-TIMER-SERIAL INPUT METER User Manual Page 48
- Page / 80
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
48
E 1 = Display Blank, 2 = External Gate*
F 1 = Display Item #2, 2 = Display Item #3
With 1 and 2 at 5V or open, Display Item #1.
-------------------------------------------------------------------
* 1 & 2 both at 0V = Meter Reset (can restore
totals).
** 1 & 2 both at 0V for selections 5, 7, 8, D =
Function Reset* (erases all totals).
__0000 Display mode 0 Normal, overload to exponential format
1 Normal, overload to 999999
Normally select 1, required for Preset function. See
dual signal conditioner for other available modes.
__0000 Counter type 0 Basic counter (use for quadrature total)
1 Extended counter
__0000 Square root 0 Set to 0.
ConFiG
Configura-
tion
__0000 V-to-F batch 0 Set to 0.
____01 Response to
PEAK
pushbutton
0 Peak
1 Valley
2 Peak (1
st
push), Valley (2
nd
push)
dSPyno
Display
____01 Item # 1 Set to 1 (ignored for Quadrature Total).
PULSES
Zero index
pulses*
_00000 _00000 _00000
_00000 _00000
Select digit to flash.
Select 0 thru 9 for flashing digit to set zero index
pulses. This should pulses per revolution x edges
per pulse (1, 2 or 4) x scale factor.
GAtE_t
Gate time*
_000.00 _000.00 _000.00
_000.00 _000.00
Select digit to flash.
Select 0 thru 9 for flashing digit to set the display
update rate from 10 ms to 199.99 s.
dEC.Pt1
Decimal pt1
1
.
11111
Decimal point flashes.
1
.
11111 11
.
1111 111
.
111 1111
.
11 11111
.
1 111111
.
Press to shift decimal point.
Scale and Offset scaling method if selected under SEtuP
SCALE1
Scale
Factor 1
0.00000 0.00000 0.00000
0.00000 0.00000 0.00000
Select the digit to flash
for the Scale Value, then
press one more time
for the Scale Multiplier.
Select -9 thru 9 for flashing first digit and 0 thru 9 for
other flashing digits. This will set the Scale Value*
from -9.99999 to 9.99999 with a fixed decimal point.
Then press to select a value from 0.00001 to
100000 in decade steps for the Scale Multiplier.
Scale Factor = Scale Value x Scale Multiplier.
OFFSt1.
Offset 1
000000 000000 000000
000000 000000 000000
Select digit to flash.
Select -9 thru 9 for flashing first digit and 0 thru 9 for
other flashing digits. dEC.Pt1 is used for decimal
point.
- LAUREATE SERIES 2 1
- 1. ORDERING GUIDE 2
- 2. TABLE OF CONTENTS 3
- 3. PRODUCT INTRODUCTION 4
- 4. RECEIVING & UPACKING 5
- 5. SAFETY CONSIDERATIONS 5
- P3 - SERIAL OMMUNICATIONS 7
- 7. MECHANICAL ASSEMBLY 8
- 8. FRONT PANEL SETUP KEYS 10
- Enabled / Disabled Menu Items 12
- Set DecPt1 to two places 15
- With E7 open, counts up 40
- A Channel 40
- B Channel 40
- 41
- Zero Index 45
- 2 Make the same as OFFSt1 52
- 18. INSTRUMENT SETUP VIA PC 67
- 20. METER CALIBRATION 71
- 21. SPECIFICATIONS 72
- 22. GLOSSARY OF TERMS 75
- 23. WARRANTY 80
Related products and manuals for Hardware Laurel-electronics LAUREATE SERIES 2 COUNTER-TIMER-SERIAL INPUT METER
Hardware Laurel-electronics Modbus Protocol For Series 2 Laureate Digital Pane User Manual
(32 pages)
(32 pages)
Hardware Laurel-electronics Ethernet Node Configuration for Series 2 Digital P User Manual
(44 pages)
(44 pages)
Hardware Laurel-electronics Custom ASCII Protocol For Laureate Series 2 Digita User Manual
(56 pages)
(56 pages)
Hardware Laurel-electronics LTM CTR SERIES PULSE, AC or PROCESS TOTALIZER INPU User Manual
(40 pages)
(40 pages)
Hardware Laurel-electronics PRO-BAR Large Bar Graph Process Display for Long D User Manual
(2 pages)
(2 pages)
Hardware Laurel-electronics LTNET485 DIN Rail Mounted Ethernet-to-Serial Devic User Manual
(2 pages)
(2 pages)
Hardware Laurel-electronics Ethernet-to-RS485 Converter Board for Laurel Elect User Manual
(2 pages)
(2 pages)
Miele GT5242 S manuals
Owner’s manuals and user’s guides for Kitchen & houseware accessories Miele GT5242 S.
We providing 1 pdf manuals Miele GT5242 S for download free by document types: Operations Instructions
Comments to this Manuals